20 Gorilla Glue Wig For Sale (2024 Update)

Don’t understand the bad reviews about no hold… you have to apply product, wait till it gets tacky and then it works like magic and that’s when you should style them.. it’s exactly like knowing how to use for eyelashes.. my brows are so stubborn I never thought I could get anything to hold them up. Literally like glue! HOWEVER, at the end of the day my brows go all white from the residue? Looks like dry skin or dandruff.. not idealDina93

This product is amazing in my opinion. Keeps the brow hairs in place all day. The product is easily removed with your normal makeup remover too. You dont need a lot of product and only apply once dont go over and over or you will see a white film. Great price point I will be buying this again.Flossy55

Bought this as I was looking for a new brow gel/brow soap product to try, read the reviews and many people said it was great… tried it and there’s NO hold. I don’t have thick brows and similar products work fine but this one is terrible, my eyebrows did not stay in place from the get go; even after I used my finger multiple times to smooth them down whilst drying. Do not recommend!GEORGE7

Major flaw in the hood. It is too large and no way to tighten. If you don't have the face mask up the hood will not stay on. I would think that the running room would know better since I have not had this problem with other products from the RR that have hoods. Other than the hood (which is a major problem) this is a nice product and fits well else where.JOANNE

At first when I started using this glue when I first got it two years ago I think it was I honestly didn’t like it nor use it cause it didn’t make my lashes stick on idk if it ws cause I wasn’t using it right but I used other lash glue n the other ones would work a year later I started using it for lashes since I ran outta my kiss lash glue and it works literally the best ever !! I’ve had wind blown in my face and the lashes stick on or I’ll pull and they won’t come off until I keep pulling which I love cause I don’t wanna worry abt my lashes staying on during weather changes so I def recommend 100% !Esmeralda Gallardo

Quite similar to an old favorite called "The Welder." It differs from "Goop" or "E6000" in that it flows much nicer than those and doesn't "ball" up as much when spread out. This adhesive is perhaps best suited for patching rubber-type products (such as floor mats), especially when used with fiberglass backing cloth. Just be sure to thoroughly scuff the surface you're gluing beforehand. Gorilla claims this adhesive is UV resistant, but I highly doubt that and would coat any exposed areas. Gorila says the adhesive is waterproof, but it shouldn't be used where there is constant immersion or in below the water line applications. This product can be used to fill in smaller-sized gaps- which can especially helpful in areas where flexibily is important- but the product's thinness means runs can be a problem when applying on vertical surfaces. Larger gap filling should be done incrementally (as in, apply product, allow it to dry for a day or 2, then re-apply) rather than doing it in one big glob, as the product may never cure properly. This glue has a very long shelf life as long as you keep the cap on tight. The tube I'm using is several years old now, yet but it still works fine.ken

My husband is a glue master. He uses this for any projects around the house. Putting together furniture, glues in the wooden pegs for extra stability. One of the kids toys breaks, glues it back together. The ceiling fan glass broke, glues all the pieces back together for a seamless finish. His fix it response is always “I’ll get the gorilla glue!” And it usually is mess free and works great. I’ve even used it for a couple of my ceramic projects that seemed to have worn down and chipped over time.Basma AC

One of my favorite adhesives! While it still has an oder, it seems to be less of one than what I experience with another brand. I like this better than E6000 and find it has a strong hold and lasts a long time. I've never had anything fall apart when glued with this stuff. It dries clear. I also find my husband will constantly steal this out of my craft room. I'm not the only one that really likes it!MrsLuck1

First, the adhesive is excellent. To open it is different from many other caulk compounds – there is a screw-cap that needs to be cut at the top-tip. If not careful when using small amounts and follow up without protecting the cap-zone it could be that the tube may dry up at the upper portion, and challenging for second uses. I found that a chop-stick protects the adhesive from drying, after cleaning with a solvent (mineral spirits or turpentine). Also, upon opening for other uses a solvent will help to clear and ready to reuse. I clean the nozzle assembly prior to plugging it with solvent and as needed prior to use. Hope this helps others, equally there is good advice from other users.Shinobi W.

I needed to attach some foam mats to a board for a dance floor. I sanded and washed and dried before applying..The gorilla glue cured for a week and then the phone was able to be just peeled off easily. I guess I'll need to stick with the brand I've used for years that never fails me it's like nails. I won't be buying this type of Gorilla glue anymore. It's alot more pricey too!Margaret Golemme

I needed something to help rebuild a small retaining wall which had failed due to the heavy snow. Using the Gorilla Heavy Duty Ult. Construction Adhesive, I was able to repair the wall. Makes for an easy job.EricW

I was pleasantly surprised that the wig I ordered was such good quality! It was delivered on time & in good condition, as well! So happy with my purchase!!!T

Wow. Clear Gorilla Glue is unlike any other glue I have seen. It is a silane-based adhesive, not CA or polyurethane. It is strong, and bonds nearly anything to anything. It has become the glue I use instead of epoxy for gluing anything to anything. Pros: Strong bond. Dries clear. No foaming. One component – no mixing. Cons: It hardens reasonably quickly, but takes 24 hours to full cure. Messy/sticky – it feels like polyurethane glue or mixed epoxy (use gloves!).David

I used this glue to fix my child plastic toy. It does seem to hold really well but I found it very hard to clamp for two hours unless it was just perfectly shaped fit in a clamp (it does say you can put it between to have a heaven things instead but that did not work for the toy I was fixing). I was going to fix another toy with it too but it was impossible. There was no way to keep it clamped for two hours even between two heavy objects it was just the nature of the shape of that toy.Susie190

Im a fan of their tape so I had high hopes for this adhesive and it didnt disappoint. It did set quickly but i still had enough time to adjust my object. I used it outside so I was happy to see that this glue is waterproof and works with multiple surfaces as I was gluing a thick plastic to concrete. Even though I needed this for a specific project – its awesome to know that its very versatile and it can be sanded and painted as well.nikiroro

This is a great product. I was already a fan of Gorilla Glue. Now with this product I am able to use this in and outside the home. This has been perfect in the home for Caulking around the tub as well as around the toilet. Outside of the home this is perfect for door and window frames. The quality is amazing and the ability to get the job complete is superb.Jake

This came in handy just in time. The metal magnets in the shower were coming off and it's still there. My man uses it alot at work. He does construction so he has tried it on flooring spots and they all agreed it seems to work great. What is nice. Doesnt take long to settle and stay in place you want to keep it in spot for awhile undisturbed but once it hardens a little you cant move object after. We really like it. So need more since my man is using it alot. I do believe they use it on walls as well but not sure. He uses it way more then I did. And I'm very impressed. He must be too.Andreia

We had a spigot start leaking and needed to be replaced. In the process we opened up the hole in the brick a bit wider to accommodate the new fitting. We used this to affix a board to the brick around the new hardware and seal it up to prevent any creepy crawlers from making their way in. It did the job well.Jojo21899

This probably is the best construction adhesive out there. Awesome glue. The issue is the caulk tube it’s placed in. Both tubes I have split while being used in caulk gun. No undo pressure just normal use. It makes one big mess and pretty much renders it unusable. I’ve never had this problem before. My guess is the tube is thinner and cheaper then it used to be. At $12.98 a tube you would think it would hold up until empty. Until they address this issue I can’t recommend it!Dennis

Gorilla – Gorilla Clear Max Construction Adhesive is a MUST HAVE for every household. There is NOTHING that this adhesive cannot mend for you, except perhaps a broken heart! I have used it to seal cracks around windows, repaired a broken piece of pottery (it's Clear, no worries). Any item that has been damaged or is broken, Gorilla – Gorilla Clear Max Construction Adhesive will strengthen it back to useable again! GREAT PRODUCT!dawnda

used this product after using locktite and having an epic failure, this product held after 24hrs and enabled me to complete the job. ***caution, this product has to wear off your hands, i have not found anything that will remove it.***darryl

As a single working Mama, I am fully responsible for all household repairs for my home and I love working on simple, decorative, and functional DIY projects. So, I was extremely thrilled when I learned I was going to be getting a free can of Gorilla Spray Adhesive to sample and review. When it arrived, I was happy to see the large 14oz full sized aerosol can and began to use it immediately. It worked really well with adhering and mounting light materials like fabric, canvas, paper, photos, and cardboard but it did not work as well with heavier materials like glass and metal. I had some swelling and warping and when I worked in my journal I had some bleed-through.HoneyB22

I use this gorilla spray glue for my intricate diecuts. I can’t really get a small enough glue pan to cover all of the area before it dries. This great glue works perfectly!Tmika

I had a problem with my spark plug socket in that the rubber insert which holds the spark plug would not stay in place. I have tried several other products to try to resolve this problem with no success. This product was able to bond rubber to metal where others have failed. It was easy to use. I look forward to using Gorilla Spray Adhesive as my go-to product from now on.Abracadebra

I sell this item everyday. Also, we use it in our salon. Some people would say it is so small. Yes the $5 is small which you should've read it in the title, it is only 3ml. Luckily, there is larger sizes.style_that_beauty

First time buy of any glue. I think I used too much without dry time midway. I can say it's 3 days later and it's still on my skin and hairline like chewing gum residue. Evidently Esha makes the glue remover too. Not sayingit's good or bad, I have to take time to apply it properly. Nothing in my tool box was able to get it off my skin, I'm picking it off slow. My unit did stay down, ear to ear for one day. I work in a extremely warm and humid environment.KIM W.

I really really love the way the product work, the hold is fantastic, but for the amount of product you get the price is too high. If you are going to price it this high than the amount of product should increasejeannie**1956

Con- Not worth 1 star at all. Wouldve rated it 0 stars if I could. Came less than half full with leakage. Bought the real one on amazon before and compared. This one was fake. Glue was transparent not milky white.. felt like paper glue. Didnt glue my lace down at all.. It made a complete mess of it. Completely a waste of money. Never buying again. Pro- came earlydamololok0

I have to say that when I first used this adhesive….I didn't like it. I thought it wasn't holding my lace frontal down. But the problem was that I wasn't using this adhesive correctly. Folks….This adhesive works great….you just have to know how to use it. Check out you tube videos on how the adhesive is supposed to be dotted along your forehead (in front of your hairline) then use your blow dyer on cool and keep it on the area you applied the adhesive until it turns clear…then re dot again for your 2nd layer and repeat same steps with the dryer. Trust me it works. It's all about getting the hang of it. Now I haven't tested out the adhesive for more than 1 to 1.5 weeks. It's just my preference to clean the lace and re-apply after a week has gone by. But otherwise it does last for that amount of time. I've gone roller skating and sweated hard and my frontal was still in tact. Just when I got home after washing my face…I tied my hair line area up with a scarf. My frontal was still laid thekiyah.j

This glue holds your lace very well. I don't have to worry about it moving or slipping. I used 4 layers and took my time to let it dry. Be very careful not to let any of your baby hairs touch the glue. Beginners should cut the lace before applying and draw a faint line to guild where the glue should be because it's strong stuff. I would recommend watching a detailed youtube video. love this product.jahnay brendanmom.g

Good shipping time. Thank you. Product works good. Clean your skin with alcohol first, then apply small neat amounts for maximum hold.rc8302

I got this for the hold as I am an Elvis Tribute and have to use glue on my wig and sideburns. Other, lesser strength glues reacted with sweat and would feel as though they were losing their stick. I would say this is really for sticking a lace down for a few days rather than a couple of hours, so for me it's a bit of overkill. The only thing I would say is that it does tend to "string", meaning it leaves a string of glue attached to the lace and to the tip of the tube which is a pain.guineapigmy

Good product, has super strong hold that lasts for hours at a time. The glue is a little stringy but if you use the small wooden stick that comes with it, you can catch the excess and cut it away with no problem. Then just remember to clean off the stick and glue tip applicator with a baby wipe or wet paper towel. The product is definitely a good buy and highly recommend.vchristrish2012

It did not harden. My application was repairing my glasses frame, metal-on-metal. I mixed the two parts of Gorilla Glue Epoxy thoroughly, used a tiny dab on an applicator, clamped it, and let it set over-night. Not only did the repair not hold but the spot on my tool bench where I mixed the epoxy was still a sticky. It may work for others, but for me it did not harden.YouTexasFriend

…just fine, and as expected, once you get a normal mixture down. However, the plunger is much more flexible than other manufacturer's product, so it is far too easy to end up with a batch that can take overnight to harden. I'm talking real rubbery and gooey. Moreover, do not store with the plunger side down, unlike other manufacturer's product the epoxy does leak slowy out of this end. It is for this fact that I rated this product so low. Also the oneway tab on the cap needs to be more prominent.Perplexed

Got this product to fill the holes in my plastic snow globe tumblers. The product sealed nicely, the only reason I'm giving this 4 stars is when you go to stop using the product it keeps coming out. Found out from you tube videos you have to pull back on the release and create a small air pocket to not allow anymore to come out.Hez0087

I bought this for an experiment: Glue soles back onto athletic shoes. I've previously tried every flexible-when-cured adhesive known to man. No Luck. (Believe it or not- Cheap hot glue was the best- until this came along.) I don't know why I didn't think of polyurethane adhesive earlier. This polyurethane adhesive worked very well on the shoes. I was surprised. About twenty-four hours after application (with a 2 hour clamp time), I flexed the shoe like crazy. Next I tried tearing the sole off. After that, I soaked the joint in water. It held up just fine. When it's well below zero degrees, I will be interested to see how well the glue holds. Note that the bubbled out adhesive where I over-applied was easy to scrape off. It was light tan in color. Also note that I tired it on steel-to-steel and wood-to-wood. The steel worked wellPJB

Env: development When I had new tile installed in the kitchen, bathroom and hall wall on the first floor of the house the person that sold it to me (and also installed it) seemed like he knew what he was doing. A couple of weeks after he put down the tile I started noticing gaps between them. Months later the tiles started coming loose and I knew that it was only going to be a matter of time before they actually became uprooted from the flooring. That means that when I went to mop the floor there would be a good chance that water would get under the tiles and could cause mold to start growing or damage the flooring. A friend of mine that does construction came by to look at the floor and was just amazed at how horrible a job the installer did. He helped me pry up the semi-loose tiles, clean the backs of them, vacuum out the sections where the tiles were removed and use the Gorilla Glue on the backs of the tiles. We weighted the tiles that were glued and left the weights in place for a couple of hours. There was no way to remedy the gaps between the tiles without using caulking which would have looked horrible. I was impressed with how well the glue worked on the loose tiles and when others start showing early signs of becoming loose I used the same technique to remove the tiles, clean them and glue them. Since then I have used this to fix things inside and outside the house; it worked great on the large plastic planters that I bought a couple of years ago that developed cracks from being exposed to the summer heat and sun and the low temperatures in the winter. I used it on the inside of the planters and it formed a solid bond in about an hour. Env: developmentAlexFortune

A good replacement for interior or exterior wood glue. It works well to fill gaps on rough surfaces. It hasn't replaced my water based wood glue but I use it often for exterior projects. I use a spray bottle with water to prep surfaces to achieve maximum adhesion and expansion while the catalyst reaction is taking place by exposure to the water. I screw or clamp pieces to hold the parts together until the resin is fully cured.66chevyg10

This product is consistently durable and strong. We use it to create sample boards for architectural products. Bonds all materials listed on packaging and more! I always feel confident that the bond will last long. Would recommend.DesignFirm

Product is good for one use only. The twist up nozzle cap did not have a hole in the spout. I had to remove it completely and punch a hole in it, but before I could dispense the glue, I I had to also remove a solid metal pin with a head on it between the hole in the cap and the nozzle. Once I twisted the nozzle to close it, it still dispensed glue, so there is no way to keep the glue from setting up in the bottle. I am just not sure how one is supposed to use a bottle of glue with a solid metal pin sealing the cap hole and a dispensing nozzle with no hole in it!jdsassypants

I used this for several items, glue back broken plastic, glue a headband, fabric covered item, etc and i feel I had to hold everything in place for several minutes. If I let go it would not stay in place despite the glue being placed on there. My go to strategy was placing tape to hold. Overall not very satisfied with its holding capability, thought it would be so much stronger.Rebeca

The dried resin still feels soft after 24hrs but is actually very solid once you sand through the surface texture. Time will tell if it does the job in repairing a cooker hob with the aid of recessed metal reinforcing members.dailysea

Used it to glue a heavy piece of broken marble together. I braced the pieces and allowed the glue to cure for 24 hours as advised and it worked wonderfully. Highly recommendedemma_the_lash

Bonds in minutes and sets strong in 24 hours. Unfortunately it states on the packaging that an applicator is included in the pack but this was not the case.3220nicholas

I purchased this glue gun last week and used it once. It drips constantly, and does not feed glue sticks evenly, often dispensing blobs instead of a distinct dot or line of glue. The chamber clogged completely while on the high setting, allowing molten glue to ooze into the rear stick-feed area instead dispensing from the tip.Sadcase

I really like this glue gun. It fits nicely in the hand, it doesn't drip all over the place and it has dual settings. I didn't understand what other reviewers were saying about when the glue stick runs out the gun stops. So either get longer glue sticks or just have them ready when it does get to that point. Otherwise, its a great piece in my tool box.Rose

This glue gun was suggested for me because it has dual temperature capabilities. I’m very pleased with it thus far! Thaw stand is fairly sturdy for a wire stand and it doesn’t leak as much as my low temp one does! I actually was able to use the tip to melt plastic bowls for another project – yes! Use with caution and not around children as the tip gets very hot!Bestteachermom